Detailed Product Description

Triple Output 
* DUAL Voltage, Ampere: DC+30V/3A, DC-30V/3A. 
* Fixed Voltage, Ampere: DC 5V/2A. 
Output: ON / OFF Control 
Key Lock: Key Lock to Avoid Error Operation 
Protection: Overload Voltage, Ampere Protection: (SMPS) 
Protect over heat and Overload 
CC, CV Set: AUTO Set 
Tracking: AUTO Tracking 
14bit Programming and the voltage, the read back of the current. 
Programming that can do up and down fast. 
High Efficiency and High Power Density 
Standard Commands for Programmable Instruments (SCPI). 
Setup: Setting and functions may be selected and stored in memory from 
the front panel. Eight setups may be stored in memory. 
Equipment: Displays information about your instrument including the Model 
number, serial number, Calibration date, GP-IB address 
and Firmware revision. 
Remote Control: Function and ranges may be controlled from a PC via 
the RS232 or the optional GP-IB interface. 
Display: 128 by 64 pixel Super Twisted LCD display 
Power Source: May be used with any line voltages from 
85V to 270Vac (+-10%, 48 to 66Hz) without any internal changes. 

The P6100 is a high performance and low cost programmable power supply. It is designed by a high-tech team. This instrument combines the bench-top and system features which provides a versatile solution for your testing requirements now and in the future. 

Specifications 
CHANNEL 3 Channel (Two variable, One fixed) 
Output Voltage 0 to +30V (Continuously variable) 
0 to -30V (Continuously variable) 
Fixed 5V 

Current Dual 0 +- 3A 
Fixed 2A 
Resolution Voltage 10mV 
Current 1mA 
Operating Mode Constant Voltage (CV) 
Constant Current (CC) 
Ripple and Noise 50mV rms 
Load Regulation 0.1% (at V = 15V, I = 1A) 
Line Regulation 1mV/V 
Programming Accuracy 0.5% of value +- 3 digits 
Read back Accuracy 0.2% of value +- 3 digits