Detailed Product Description

Dual Channel and Auto Calibration. 
DC to 5MHz Oscilloscope band width 
Sampling Time: 
* Single CH Mode: 50Ms/S 
* Dual CH Mode: 25Ms/S 
Automatic Triggering. 
Automatic setting for horizontal and vertical division 
Roll and Single shot mode 
Excellent internal noise reduction 
Real time Update. 
Auto ranging. 
16 shot waveform and setup memories 
Built-in auto ranging True-RMS digital multi-meter 
Data hold and run mode. 
Extra Bright Back light display 
Low battery indication. 
Max. Voltage between any Input and Ground: DC or AC 600Vpeak 
RS-232 interfaces for transferring measurement data and waveform. 
Display Type: Super-Twist 132 x 128 pixels 
Designed to comply with safety standard for UL3111, CSA C22.2 No.1010-1 
Oscilloscope Function 

Horizontal 

Sample Rate 25 Meg-samples per second (Dual CH mode) 
50 Meg-samples per second (Single CH mode) 
Record Length 512 in single shot and glitch capture mode 
256 in all other modes. 
Sample / Division 25 
Update Rate Real time 
Modes Single shot, Roll, Normal 
Accuracy 0.01% 
Sweep Rate 1uS to 5S in 1, 2, 5 sequence 

Vertical 

Bandwidth 5MHz 
Resolution 8 Bit 
Channels Dual 
Coupling AC, DC 
Input impedance 1 Mohm 
Accuracy 3% 
Max. Input Volts DC or AC 600Vp-p 
Volt / Division 50mV to 500V in 1, 2, 5 sequence 

Triggering 

Type Internal, External 
Coupling AC, DC 
Slope Rising or Falling edge 
Internal Trigger Sensitivity 2/20 Division 

Other 

Wave Form Memory 16 Shot 


Digital Multi-Meter Function 

DC V 

Range Resolution Accuracy Impedance 
5V 0.001V +- (0.3%+3) 1 Mohm 
50V 0.01V 
500V 0.1V 
1000V 1V 

AC V 

Range Resolution Accuracy Impedance 
50Hz~450Hz 0.45kHz~5kHz 5kHz~200kHz 
3V 0.001V +-(0.75%+5) +-(2%+5) +-(2.5%+5) 
30V 0.01V 
300V 0.1V 
750V 1V N/A 

OHM 

Range Resolution Accuracy Over Load Protection 
5 kohm 0.001 kohm +-(0.5% +5) 600V DC or 
AC Peak 
50 kohm 0.01 kohm 
500 kohm 0.1 kohm 
5 Mohm 0.001 Mohm +-(0.75%+10) 

Continuity Test 

Test Voltage Max. Test Current Over Load Protection 
1.7V 
100 digits 600V DC or AC Peak 

Frequency 

Range Resolution Accuracy Over Load Protection 
100 Hz 0.01 Hz +- (0.5% +5) 600V DC or 
AC Peak 
1 kHz 0.0001 kHz 
10 kHz 0.001 kHz 
100 kHz 0.01 kHz 
1 MHz 0.0001 MHz 

RPM 

Function Range Resolution Accuracy 
RPM 240~60,000 1RPM +- (0.5% +5) 
% Duty, Cycle 25% ~ 75% (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) 
Pulse Width 0.2 ~ 1999.9mS (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) 

General 

Power Requirement 9V 6F22 x 2 
Dimension 90(W) x 190(D) x 32(H) mm 
Weight Approx. 260g 
Standard Accessories Test Lead, Instruction Manual, Charger 
Optional Accessories Holster, RS-232C Cable and Software, Carrying case