Detailed Product Description

Waveform: 
15MHz Sine, Square Wave 
100KHz Triangle and Ramp Wave 
Mode: CW, BURST, SWEEP, TRIG 
Frequency Range: 1Hz~15MHz 
Resolution: 4 Digits 
DC Offset: -7.5V ~ +7.5 V 
Stability: Direct digital synthesis for excellent stability. 
Setup: Setting and functions may be selected and stored in memory from 
the front panel. Eight setups may be stored in memory. 
Equipment: Displays information about your instrument including the Model 
number, serial number, Calibration date, GP-IB address 
and Firmware revision. 
Remote Control: Function and ranges may be controlled from a PC via 
the RS232 or the optional GP-IB interface. 
Display: 128 by 64 pixel Super Twisted LCD display 
Power Source: May be used with any line voltages from 
85V to 270Vac (+-10%, 48 to 66Hz) without any internal changes. 

The G5100 is a general purpose yet high-performance instrument capable of generating standard waveform patterns at frequencies. High performance and low cost function generator with synthesized frequency accuracy. It is designed by a high-tech team, using the most advanced waveform synthesis techniques to generate a pure low distortion and clean output. This instrument combines the bench-top and system features which provides a versatile solution for your testing requirements now and in the future. 

Specification 
Frequency Range 1Hz ~ 15MHz 
Resolution 4 digits 
Accuracy +-(Setting value x 0.5% + 1 digit) 
Wave Form Characteristics 
Sine 
Frequency Range 1Hz ~ 15MHz 
Amplitude Max. 10Vpp (Impedance 50ohm) 
Harmonic Distortion < 1.5%(10Hz to 100Hz) 
Triangle 
Frequency Range 1Hz ~ 100kHz 
Linearity Better than 1% 
Square 
Frequency Range 1Hz ~ 15MHz 
Rise/Fall time < 35nS 
Symmetry 20% ~ 80% 
Pulse 
Frequency Range 1Hz ~ 15MHz 
Rise/Fall time < 35nS 
Duty Cycle 100nS to 10S 
Ramp 
Frequency Range 1Hz ~ 100kHz 
Linearity 1% (1Hz~100kHz) 
Output Characteristics 
Waveforms Sine, Triangle, Square, Pulse, Ramp 
Output Range Max. 10Vpp (Impedance 50ohm), Max. 20Vpp (Impedance ohm) 
Impedance 50ohm +- 5% 
Attenuator 0, 20 dB 
DC Offset -7.5 ~ + 7.5V (No Load) 
SWEEP Characteristics 
SWEEP period 9.95S ~ 0.05S 
SWEEP range 1 : 1 to 10 : 1 
External SWEEP To be controlled by the VCF input 
VCF Input 
Input voltage +-5V DC, maximum sweep occurs at 5VDC 
Accuracy 1% 
Input Impedance Approximately 1kohm 
TTL output 
Level (TTL) Fixed amplitude, 0.4V: for a low "L", and g than 2.4V: for a high "H" 
Rise and Fall time < 35nS 
FUNC output 
Level (TTL) Variable Amplitude (Max. 10Vpp, Impedance 50ohm)