Detailed Product Description

Dual Channel and Auto Calibration. 
DC to 1MHz Oscilloscope band width 
Sampling Time 
* Dual CH mode: 25 Ms/S 
* Single CH mode: 50 Ms/S 
Automatic Triggering. 
Automatic setting for horizontal and vertical division 
Roll and Single shot mode 
Excellent internal noise reduction 
Real time Update and Auto ranging. 
45 shot reference waveform and setup memories (45 shot wave form) 
Built-in auto ranging True-RMS digital multi-meter 
Data hold and run mode. 
Extra Bright Back light display 
Low battery indication. 
Max. Voltage between any Input and Ground: DC or AC 600Vpeak 
RS-232 interfaces for transferring measurement data and waveform. 
Display Type: Super-Twist 132 x 128 pixels 
Designed to comply with safety standard for UL3111, CSA C22.2 No.1010-1 
Technical Specification 

Oscilloscope Function 

Horizontal 

Sample Rate 25 Meg-samples per second (Dual CH mode) 
50 Meg-samples per second (Single CH mode) 
Record Length 512 in single shot and glitch capture mode 
256 in all other modes. 
Sample / Division 25 
Update Rate Real time 
Modes Single shot, Roll, Normal 
Accuracy 0.01% 
Sweep Rate 1uS to 5S in 1, 2, 5 sequence 

Vertical 

Bandwidth 1MHz 
Resolution 8 Bit 
Channels Dual 
Coupling AC, DC 
Input impedance 1 Mohm 
Accuracy 3% 
Max. Input Volts DC or AC 600Vp-p 
Volt / Division 0.5V to 500V in 1, 2, 5 sequence 

Triggering 

Type Internal 
Coupling AC, DC 
Slope Rising or Falling edge 
Internal Trigger Sensitivity 2 / 20 Division 

Other 

Wave Form Memory 8 Shot 
REF Wave From Memory 45 Shot 


Digital Multi-Meter Function 

DC V 

Range Resolution Accuracy Impedance 
5V 0.001V +- (0.3% +3) 1 Mohm 
50V 0.01V 
500V 0.1V 
1000V 1V 

AC V 

Range Resolution Accuracy Impedance 
50Hz~450Hz 0.45kHz~5kHz 5kHz~200kHz 
3V 0.001V +- (0.75%+5) +- (2%+5) +- (3%+5) 1 Mohm 
30V 0.01V 
300V 0.1V 
750V 1V N/A 

OHM 

Range Resolution Accuracy Over Load Protection 
5 kohm 0.001 kohm +- (0.5% +5) 600V DC or 
AC Peak 
50 kohm 0.01 kohm 
500 kohm 0.1 kohm 
5 Mohm 0.001 Mohm +- (1% +10) 

Continuity Test 

Test Voltage Threshold Over Load Protection 
1.7V 
100 digits 600V DC or AC Peak 

RPM 

Function Range Resolution Accuracy 
RPM 240~60,000 1RPM +- (0.5% +5) 
% Duty, Cycle 25% ~ 75% (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) 
Dwell 0.3 ~ 352.8 (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) 
Pulse Width 0.2 ~ 1999.9mS (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) 
Frequency 2~ 1MHz (30 RPM to 19,000 RPM, Pulse Width > 0.5mS) 

General 

Power Requirement 9V 6F22 x 2 
Dimension 90(W) x 190(D) x 32(H) mm 
Weight Approx. 260g 
Standard Accessories Test Lead, Instruction Manual,Holster,RS-232C Cable and Software 
Optional Accessories Inductive Pick-up, Capacity Pickup